.: Measuring tips
   
Rules for Measuring Drapes:



Width is always measured and expressed first when ordering.
Length (Height) is always measured second when ordering.
Always use Metal Tape measure for accurate result.
Never measure the existing drape or window coverings.

 
Determine Drapery Length:
  The rod should be positioned at least 4” above the window so pleats are not seen from outside. Length is measured from where the top of the rod will be positioned to the desired length. If using decorative traverse rod or pole with rings, measure from the eye of the carrier or ring to the desire length style.
 

Measurement for Panels:
Refer to window figure.
First measure width of the window.
Add 3” for Returns on each side of the rod. Returns should be calculated only for pocket rods. This is the measurement from the wall to the face of the rod. As an example window width is 43” + 3” + 3” = 49”.

Take length measurement from window frame to desired length. Panel will have a 2” header on top which should not be included in the measurement.
 

1) Sill length: Length to sill of the window.
2) Apron length: Length to sill plus 3”.
3) Floor Length: Length to floor for traditional approach.
4) Trouser Break Length: This style is very popular today and allows a 2” - 3” break on the floor.
5) Puddle Style: The most formal look, puddle your draperies with an additional 6”-8” in length so the draperies spill onto the floor.
 

Tip: Order items 2-3 times window width to achieve desired fullness.
 

Measurement for Valances:

  Refer to window figure.
  Follow same instructions to achieve your width measurement from above.
  Add 3” returns each side.
  No need to take a length measurement for valances. Lengths are as stated for each different style of valance.
 

Tip: Order items 2-3 times window width to achieve desired fullness.
 
:. Measuring Tips
:. Styling Solutions
 
   
  Site Developed By : Fabrics & Trims Site Map Inquiry Privacy Policy Contact Us